Loading...
Serving Sherman, TX and surrounding areas. (903) 294-5759
Sherman ConcreteCompany
Sherman Concrete
Sherman's clay soil shifts with every rain and dry spell, and most cracked garage floors start failing from the base - not the surface. We build floors that hold up because we start with the ground.
Garage floor concrete in Sherman, TX starts with removing the old slab if there is one, grading and compacting the ground underneath, and pouring fresh concrete over a prepared base. Most jobs take one day of active work, though the concrete needs about seven days before you can park on it.
If your garage floor is cracking, heaving, or breaking apart at the surface, the cause is almost always what is happening underneath - not the concrete itself. Sherman sits on Blackland Prairie clay, which swells when it rains and shrinks when it dries out. A floor that was not poured with that in mind will fail within a few years regardless of how smooth the surface looks on day one.
Many homeowners also look at decorative concrete finishes when replacing a garage floor - a stained or sealed surface resists oil stains, looks cleaner, and holds up better to daily use than a plain gray slab.
Hairline cracks are common and often harmless. But if you are seeing cracks wider than a quarter inch, cracks that run the full length of the floor, or ones that have noticeably grown over the past year, the floor is no longer stable. In Sherman, this pattern is usually driven by clay soil shifting underneath - patching alone will not fix a floor that is still moving.
If part of your garage floor sits higher or lower than it used to, the soil beneath has shifted. This is especially common in Sherman neighborhoods built on Blackland Prairie clay, which expands and contracts with every rain and dry spell. An uneven floor is a tripping hazard and a sign the base has been compromised.
When the top layer starts peeling off in chips or feels rough and crumbly, the surface has deteriorated past the point of repair. This often happens to floors that were never sealed, or that went through years of moisture exposure without protection. Once flaking starts, it tends to accelerate - no sealer will restore a floor in this condition.
A properly poured garage floor slopes gently toward the door so water drains out. If puddles sit on your floor for hours, the drainage slope is wrong or the floor has settled unevenly. Standing water speeds up concrete deterioration and can damage anything stored on the floor, including vehicles.
We handle the full project from start to finish. That means demolition and hauling away the old slab, grading and compacting the base, setting forms, and pouring a reinforced slab with proper control joints. The concrete floor installation process is the same whether you want a plain functional surface or a finished floor with a sealer applied the same week. We explain every option before you decide.
A garage floor replacement is also a good time to address drainage and slope. We grade the new floor to drain toward the door so water does not pool after rain or when you wash a vehicle. According to the American Concrete Institute, residential garage floors should be poured at a minimum four-inch thickness with reinforcement to handle vehicle loads - standards we follow on every job.
Full demolition of the old slab, grading and compacting the base, and a fresh reinforced pour - the right call when the existing floor has failed or was never built correctly for Sherman soil.
Planned grooves cut into the fresh concrete give it a place to crack as it cures and shrinks, so any cracking happens in straight, manageable lines rather than randomly across your floor.
Steel reinforcement embedded in the pour holds cracks together if they do form, preventing them from widening or shifting - particularly important in Sherman's moving clay soil.
A protective sealer applied after curing guards against oil stains, moisture, and surface wear from Sherman's summer heat and occasional winter freezes - extending the life of your new floor significantly.
Sherman sits on the Blackland Prairie, a region known for some of the most expansive clay soil in Texas. That clay swells when it rains and shrinks when it dries - a cycle that repeats every season and puts constant stress on any concrete slab sitting on top of it. Many of the garage floors that fail in Sherman were poured without accounting for this reality. A floor built the same way you would pour one in central Texas or in a northern climate is a floor that will not last here. The Texas A&M AgriLife Extension has documented how expansive soils in North Texas affect concrete and foundations - a reference worth reading if you want to understand what you are dealing with before you call anyone.
Sherman's housing stock also plays a role. A large share of homes here were built in the 1960s through 1980s, meaning many garages still have their original slabs - slabs that have absorbed decades of soil movement, heat, and occasional hard freezes. Homeowners in Denison and throughout Sherman often tell us their floor has been patched several times without lasting results. That is usually a sign the base was never addressed - which is exactly where a proper replacement starts.
Call or fill out the estimate form and we will get back to you within one business day. We ask a few quick questions upfront so the site visit is efficient - no phone quotes that change once we see the garage.
We look at your current floor, check the soil and drainage situation, and measure the space. You get a written estimate covering demolition, base prep, the pour, and any finishing work - no surprises when the job is done.
We handle the City of Sherman permit process before any crew shows up. Once the permit is in hand, we schedule around the forecast - spring and fall slots book quickly, so locking in your date early is worth doing.
We remove the old floor, grade and compact the base, lay reinforcement, and pour the new slab in one active work day for a standard garage. When the floor has cured, we walk through the result with you and explain the sealing timeline.
We respond within one business day. No obligation, no pressure - just an honest quote for your Sherman garage floor project.
Sherman's expansive clay soil is the main reason garage floors crack here. We compact the subgrade thoroughly and build a stable base layer designed for how this soil actually behaves - not just the minimum a spec sheet calls for. That groundwork is what separates floors that hold from floors that start cracking within a few seasons.
We handle the City of Sherman permit application as a standard part of every garage floor project. A permitted job means an inspector signs off on the finished work - protecting your home's value and giving you documented proof the work was done correctly if you ever sell or refinance.
You get a written quote before we start that covers demolition, base work, the pour, and cleanup. If something unexpected turns up during demo or prep, we tell you before we proceed - not after. The price you approved is the price you pay.
Pouring concrete in Sherman's summer heat requires care - a surface that dries too fast will crack and weaken. We schedule pours for early morning in hot weather and use the right mix additives to protect the surface while it cures. The result looks as good in year five as it did the week it was poured.
Every one of these points comes down to doing the job correctly from the ground up - not cutting corners at the base and hoping the surface holds. That is the standard we work to on every garage floor project in Sherman and across Grayson County.
Add color, texture, or pattern to your garage floor or any other concrete surface around your home.
Learn MoreProfessional interior and exterior concrete floor installation for residential and commercial spaces.
Learn MoreSpring and fall slots fill fast in Grayson County - reach out now so your project is locked in before the busy season.